Xiang Welding Industrial Co Ltd
Standard
Submerged arc welding wire Application
AWS EM12 is widely used in both for high-speed welding steel plate of tensile strength 420N/mm2 and filling welding
AWS EH14  is widely used for high-speed welding steel plate of tensile strength 490N/mm2 and filling welding。Mechanical properties of deposited metal is very stable.
AWS EM13K is widely used both for high-speed welding steel plate of tensile strength 420N/mm2 and filling welding. It is widely used for welding boiler, pressure vessel, bridge, ship etc.
AWS ER308L can be used in petrochemical and other industries. Like 022Cr19Ni10 (SUS 304L) and other materials of welding.
SAW welding wire
Submerged arc welding wire
Submerged Arc Welding wire also called SAW wire vary from 1.2mm ('thin' wire or twin wire submerged arc) to 6.4mm in diameter and are capable of carrying welding currents ranging from 150 to 1600amps. The wires for ferritic steels are generally copper coated to increase contact tip life, improve electrical conductivity and extend the shelf life.
The welding wire is generally of a composition that matches that of the parent metal and wires are available for the welding of carbon and low and high alloy steels, stainless steels, nickel and copper/nickel alloys. In addition, submerged arc welding may be used for surfacing with corrosion or wear resistant coatings using both wires and flat strips. The wires may be solid or metal cored. Strips may be rolled or sintered.
Standard: AWS El-8, H08A, AWS EM-12, H08MnA, Eh-14, H10Mn2, EM12K
Sizes: 2.5mm, 3.2mm, 4.0mm, 5.0mm
Packaging Details: OEM acceptable
25KG/coil, 50KG/coil, 250KG/coil.
Our advantages is stable arc, little spatter, less smoke; higher deposition efficiency; excellent welding performance; easy restrike.
Payment terms: 100% LC at sight or 30% TT in advance balance against copy of BL.
Trade terms: FOB, CFR, CIF, Loading Port: Xingang, Tianjin, China
Delivery Detail: Within 15 days after confirmation
Key words: welding wire, Submerged Arc Welding wire, SAW wire, AWS El-8, H08A, AWS EM-12, H08MnA, Eh-14, H10Mn2, EM12K


AWS ER308 can be used in petrochemical and other industries such as 12Cr18Ni9 (SUS 302), 06Cr19Ni10 (SUS 304) and other materials of welding.
AWS EM12K is widely used in both for high-speed welding steel plate of tensile strength 420N/mm2 and filling welding
Submerged arc welding wire AWS A5.17 EL8 welding low carbon steel and some low alloy steel (such as 16Mn) structure with flux.
AWS A5.17 EM12 Submerged arc welding wire welding carbon steel and low strength alloy steel such as 16Mn with flux.
AWS A5.17 EH14 Submerged arc welding wire is a copper coated steel wire, and it can be used in automatic submerged arc welding with welding flux.
Submerged arc welding wire suited for high temperature creep resistant 5%Cr0.5%Mo steels. The 5%Cr0.5%Mo creep resistant alloy is used for hot hydrogen service, high temperature strength at service temperatures up to +600°C. Typical applications are found in oil refineries.
Wire electrode for submerged arc welding intended for welding mild steel used in pressure vessels, shipbuilding and steel structures.
Submerged arc welding wire for high temperature, creep resistant, modified 9%Cr1%Mo martensitic steel (T91/P91).
CrMo-alloyed low impurity wire electrode for submerged arc welding of quenched and tempered steels and heat-resistant steels in boiler and pressure vessel construction as well as pipe manufacture.
Wire electrode for submerged arc welding with Ti and B to achieve optimum impact properties with the two-run technique with pipe-mill fluxes.
Exclusively for as-welded applications.
Ni-alloyed wire electrode for submerged arc welding of fine grain steels with low temperature toughness and Nickel-Alloy steels in vessel, apparatus and tank construction as well as pipe manufacture.
Mo-alloyed wire electrode with higher Si-content for submerged arc welding of pipe steels with low Si-content.
Wire electrode with higher Si-content for submerged arc welding of non-alloy and fine grain steels, boiler steels and pipe steels.
Ni-alloyed wire electrode for submerged arc welding in the multi-run technique of fine grain steels in vessel and apparatus construction as well as pipe steels for low temperature toughness requirements down to -60 °C.
Mo-alloyed wire electrode with higher Mn-content and micro alloying additions Ti / B for submerged arc welding in the two-run technique of pipe steels for high toughness requirements also at low temperatures at -46 °C or below.
NiMo-alloyed wire electrode with higher Mn-content for submerged arc welding of high tensile fine grain steels in vessel and apparatus construction and high tensile pipe steels.
NiCu-alloyed wire electrode for submerged arc welding of weathering steels and special structural steels in steel construction as well as plant and bridge construction.
Mo-alloyed wire electrode with higher Mn-content for submerged arc welding of fine grain steels, pipe steels and heat-resistant boiler and vessel steels.
Submerged arc welding wire for high temperature, creep resistant steel 9%Cr-1%Mo martensitic steel. Approved for service temperatures up to 600 °C. Used for heat exchangers, boiler superheater tubing, piping and pressure vessels for the oil and gas industries.
NiMo-alloyed wire electrode with higher Mn-content for submerged arc welding of high tensile fine grain steels in vessel and apparatus construction, high tensile pipe steels and high strength shipbuilding steels.
Wire electrode with higher Si-content for submerged arc welding of non-alloy and fine grain steels (especially Off-Shore), higher strength shipbuilding steels, pipe steels, boiler and vessel steels.
CrMo-alloyed low impurity wire electrode (suitability for step-cooling) for submerged arc welding of heat-resistant steels in boiler and pressure vessel construction as well as pipe manufacture.
Mo-alloyed wire electrode with high Mn-content for submerged arc welding in the two-run technique of fine grain steels, pipe steels and heat-resistant boiler and vessel steels.
Mo-alloyed wire electrode with higher Si- and Mn-content for submerged arc welding of pipe steels with low Si- and Mn-content.
Wire electrode for submerged arc welding intended for welding pipeline steel. Developed for multi-wire welding with two-run technique, for applications in sour gas service.
NiMo-alloyed wire electrode with higher Mn-content for submerged arc welding of high tensile pipe steels and high tensile fine grain steels in vessel and apparatus construction as well as Off-Shore applications.
Mo-alloyed wire electrode for submerged arc welding of fine grain steels, pipe steels and heat-resistant boiler and vessel steels.
NiCrMo-alloyed wire electrode with higher Mn-content for submerged arc welding of high tensile quenched and tempered fine grain steels in vessel and apparatus construction as well as high tensile pipe steels.
Ni-alloyed wire electrode for submerged arc welding in the multi-run technique of fine grain steels in vessel and apparatus construction as well as pipe steels for low temperature toughness requirements down to -60 °C.
Ni-alloyed wire electrode for submerged arc welding of fine grain steels with low temperature toughness and Nickel-Alloy steels up to 3.5 % Ni in vessel, apparatus and tank construction as well as pipe manufacture for low temperature toughness requirements down to -100 °C.
Submerged Arc AWS A5.9: ER2209 is a duplex stainless steel submerged arc welding wire suitable for welding duplex stainless steels grades 2205 and 2304. Weld metal exhibits corrosion resistance similar to grade 904L in most applications. Submerged Arc AWS A5.9: ER2209 is also suitable to weld grade 2205 or grade 2304 to mild steel.
AWS A5.9: ER2594 has been developed for welding Super-duplex stainless steels 2507 and other super-duplex stainless steels. The wire has excellent resistance to stress corrosion (SCC) in chloride-bearing environments and excellent resistance to pitting and crevice corrosion.
AWS A5.14: ERNiCrMo-4 welding wire has been developed for welding INCONEL alloy C-276 and other nickel-chromium molybdenum alloys, cladding steel, welding carbon steel to nickel base alloys and stainless steels to nickel alloys.
Wire electrode for submerged arc welding intended for weldingwork-hardenable steels, armor steel and austenitic stainless manganese steels. Also suitable for joining stainless chromium steels with chromium content up to 18% and overlay welding of mild steels and low-alloy steels.
AWS A5.9: ER308H is a submerged arc welding wire intended for welding 18% Cr – 10% Ni austenitic stainless steels for service temperature up to +700°C, base material 1.4948/AISI 30H.
AWS A5.9: ER308L is a submerged arc welding wire intended for welding 18% Cr – 10% Ni austenitic stainless steels 1.4306 type 304, 304L. Suitable for service temperature from -196 °C to +350 °C.
AWS A5.9: ER309L is a submerged arc welding wire suitable for joining stainless Cr-Ni steels type 309, Cr-steels and dissimilar steels like austenitic stainless steels to mild or low-alloyed steels, buffer layers and overlays on C-Mn, mild steel or low alloy steels and for joining 304L/321. Also recommended for welding12%Cr ferritic steels.
AWS A5.9: ER309LMo is a submerged arc welding wire similar to AWS A5.9: ER309L with the addition of 2.0 - 3.5% molybdenum to increase pitting corrosion resistance.
AWS A5.9: ER(309LNb) is a submerged arc welding wire niobium-stabilized similar to AWS A5.9: ER309L with the addition of Nb. Suitable for overlay on carbon and low-alloy steels, when a type 347 overlay is required.
AWS A5.9: ER310 is a submerged arc welding wire used for joining heat resistant fully austenitic steels type 25Cr/20Ni.
AWS A5.9: ER316H is a submerged arc welding wire intended for welding austenitic stainless steels that will operate at high temperatures500-800°C, under long term creep conditions.
AWS A5.9: ER316L is a submerged arc welding wire intended for welding austenitic stainless steels 1.4435 / 316L.Suitable for service temperature from -120 ° to +400 °C.
AWS A5.9: ER317L is a submerged arc welding wire intended for welding 19Cr/13Ni/3.5Mo austenitic stainless steels type 317L. The increased Mo content compared to grade 316L assures increased resistance to pitting and crevice corrosion.
AWS A5.9: ER318 is a submerged arc welding wire intended for welding 19Cr/12Ni/3Mo stabilized Ti grades like 1.4571 / 316Ti. Also suitable for the welding of similar unstabilized grades 316 or 316L.
AWS A5.9: ER320LR is a submerged arc welding wire intended for welding steels of similar composition in wrought and cast forms. AWS A5.9: ER320LR has composition similar to ER320, except that carbon, silicon, phosphorus and sulfur levels are kept at a lower level.
AWS A5.9: ER347 is a submerged arc welding wire intended for welding 18Cr/10Ni stabilized with Ti or Nb austenitic stainless steels, grades 321 and 347.
SFA 5.9: ER385 is a submerged arc welding wire suitable for welding steels of similar composition of 20Cr/25Ni/4.5Mo/1.5Cu type (AISI 904L).
Wire electrode for submerged arc welding intended for welding 13% chromium steels.
Service temperatures up to +450 °C.
Wire electrode for submerged arc welding intended for welding martensitic 13% chromium-nickel steels. Also used for overlay mild and low alloy steels. Used in Turbines, Valve bodies, High pressure piping, Offshore, Power generation.
Wire electrode for submerged arc welding often used for surfacing applications which need superior resistance to abrasion. It requires preheat and inter-pass temperatures of not less than 225ºC, followed by slow cooling. Post weld heat treatment is used to temper the weld deposit.
Wire electrode for submerged arc welding intended for welding ferritic and martensitic chromium steels with 15-17%Cr, AISI 430.Also suitable for surfacing gas, water and steam valves and fittings. Service temperatures up to +450 °C. Scaling resistant up to +950 °C.
SFA 5.14: ERNiCrMo-3 welding wire has been developed for welding INCONEL alloy 625, INCOLOY alloy 825, INCOLOY alloy 25-6MO, alloy 20, welding the clad side of joints in steel with nickel-chromium molybdenum alloys, cladding steel with nickel-chromium molybdenum weld metal, surfacing of mild steel and for dissimilar welding of stainless steels to nickel alloys and carbon steels.
SFA 5.14: ERNiCr-3 welding wire has been developed for welding Ni base alloys. The weld metal has excellent mechanical properties with high hot cracking resistance, high strength and good corrosion resistance, including oxidation resistance and creep-rupture strength at elevated temperatures.
Search Submerged arc welding wire Products

SDX EM13K is a copper-coated carbon-steel solid wire for submerged arc welding. Moderate manganese and silicon contents allow faster travel speeds, resistance to porosity, and improved mechanical properties.In an effort to best serve the packaging needs and requirements of our customers globally, this product features region-exclusive part numbers. To obtain the complete list of part numbers available in your region, e-mail us at subarc@itw-welding.com, contact your regional ITW Welding office, or contact Hobart Brothers customer service (North America) 
SDX S3Ni1Mo-EF3 is a copper-coated, low-alloy, solid wire for submerged arc welding. The nominal nickel-molybdenum composition of SDX S3Ni1Mo-EF3 provides good low-temperature toughness and is suitable for welding many high-strength low-alloy (HSLA) .In an effort to best serve the packaging needs and requirements of our customers globally, this product features region-exclusive part numbers. To obtain the complete list of part numbers available in your region, e-mail us at subarc@itw-welding.com, contact your regional ITW Welding office, or contact Hobart Brothers customer service (North America)
AWS A5.17: EM12K, Submerged Arc Solid Wire Carbon Steel ,China, Tianjin is a copper-coated carbon-steel solid wire for submerged arc welding. SDX S2Si-EM12K is a versatile, general purpose product suitable for joining a wide range of non-alloyed steels with a wide variety of flux(es).
AWS A5.17: EM12K, Submerged Arc Solid Wire is a copper-coated, carbon-steel solid wire for submerged arc welding. It has a high manganese and low residual content for enhanced mechanical properties desirable in critical applications.
is a low-alloy composite metal-cored wire electrode for submerged arc welding in high strength applications.And it meets AWS A5.23 chemistry F3, and is designed for tensile strength levels above 100 ksi.
AWS A5.23: ECM4 Submerged Arc Solid Wire is a low-alloy composite metal-cored wire electrode for submerged arc welding in high strength applications. AWS A5.23: ECM4 meets AWS A5.23 chemistry M4, and is designed for tensile strength levels above 110 ksi.
is a low-alloy composite metal-cored wire electrode for submerged arc welding in high strength applications.And it meets AWS A5.23 chemistry M1, and is designed for tensile strength levels above 80 ksi.
 is a composite electrode for submerged arc welding of carbon steel plates using the recommended fluxes. The electrode chemistry conforms to the solid wire classification EM13K per AWS A5.17.
AWS A5.17: EC1 Submerged Arc Solid Wire is a composite electrode for submerged arc welding of carbon steel plates using the recommended fluxes. The electrode chemistry conforms to the solid wire classification EM12K per AWS A5.17.
is a low-alloy composite metal-cored wire electrode for submerged arc welding in high strength applications. And it meets AWS A5.23 chemistry Ni1, and is designed for tensile strength levels above 70 ksi.
is a seamless low-alloy cored wire for welding base materials with a yield strength of up to 100 ksi (690 MPa)
AWS A5.17: EC1 EM13K-S Submerged Arc Solid Wire is a composite electrode for submerged arc welding of carbon steel plates using the recommended fluxes. This wire is specially formulated to maintain good mechanical properties when welding at high heat inputs. The electrode chemistry conforms to the solid wire classification EM13K per AWS A5.17.
AWS A5.17: ECG/EC1 Submerged Arc Solid Wire is a seamless, carbon-steel, cored wire for submerged arc-welding for welding carbon/non-alloyed steels, and some low-alloy steels.
AWS: ERNiCrMo-4 Submerged Arc Solid Wire offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
AWS: ERNiCu-7 Submerged Arc Solid Wire offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online
AWS: ERNiCr-3 Submerged Arc Solid Wire Used for dissimilar welding applications between various nickel alloys and stainless or carbon steels, as well as for overlay
AWS: ERNiCrCoMo-1 Submerged Arc Solid Wire Used for MIG, TIG and SAW welding of nickel-chrome-cobalt-molybdenum alloys
AWS: ERNiCrMo-10 Submerged Arc Solid Wire Excellent corrosion resistance in oxidizing as well as reducing media in a wide variety of chemical process environments
AWS: ERNiCrMo-3 Submerged Arc Solid Wire Most popular nickel alloy for cladding
AWS: ERNiCrMo-14 Stainless Welding Wire Suitable for highly acidic and high heat environments