Submerged arc welding wire Application
SAW welding wire
Submerged arc welding wire
Submerged Arc Welding wire also called SAW wire vary from 1.2mm ('thin' wire or twin wire submerged arc) to 6.4mm in diameter and are capable of carrying welding currents ranging from 150 to 1600amps. The wires for ferritic steels are generally copper coated to increase contact tip life, improve electrical conductivity and extend the shelf life.
The welding wire is generally of a composition that matches that of the parent metal and wires are available for the welding of carbon and low and high alloy steels, stainless steels, nickel and copper/nickel alloys. In addition, submerged arc welding may be used for surfacing with corrosion or wear resistant coatings using both wires and flat strips. The wires may be solid or metal cored. Strips may be rolled or sintered.
Standard: AWS El-8, H08A, AWS EM-12, H08MnA, Eh-14, H10Mn2, EM12K
Sizes: 2.5mm, 3.2mm, 4.0mm, 5.0mm
Packaging Details: OEM acceptable
25KG/coil, 50KG/coil, 250KG/coil.
Our advantages is stable arc, little spatter, less smoke; higher deposition efficiency; excellent welding performance; easy restrike.
Payment terms: 100% LC at sight or 30% TT in advance balance against copy of BL.
Trade terms: FOB, CFR, CIF, Loading Port: Xingang, Tianjin, China
Delivery Detail: Within 15 days after confirmation
Key words: welding wire, Submerged Arc Welding wire, SAW wire, AWS El-8, H08A, AWS EM-12, H08MnA, Eh-14, H10Mn2, EM12K
Wire electrode for submerged arc welding intended for welding mild steel used in pressure vessels, shipbuilding and steel structures.
Submerged arc welding wire for high temperature, creep resistant, modified 9%Cr1%Mo martensitic steel (T91/P91).
CrMo-alloyed low impurity wire electrode for submerged arc welding of quenched and tempered steels and heat-resistant steels in boiler and pressure vessel construction as well as pipe manufacture.
Wire electrode for submerged arc welding with Ti and B to achieve optimum impact properties with the two-run technique with pipe-mill fluxes.
Exclusively for as-welded applications.
Ni-alloyed wire electrode for submerged arc welding of fine grain steels with low temperature toughness and Nickel-Alloy steels in vessel, apparatus and tank construction as well as pipe manufacture.
Mo-alloyed wire electrode with higher Si-content for submerged arc welding of pipe steels with low Si-content.
Wire electrode with higher Si-content for submerged arc welding of non-alloy and fine grain steels, boiler steels and pipe steels.
Ni-alloyed wire electrode for submerged arc welding in the multi-run technique of fine grain steels in vessel and apparatus construction as well as pipe steels for low temperature toughness requirements down to -60 °C.
Mo-alloyed wire electrode with higher Mn-content and micro alloying additions Ti / B for submerged arc welding in the two-run technique of pipe steels for high toughness requirements also at low temperatures at -46 °C or below.
NiMo-alloyed wire electrode with higher Mn-content for submerged arc welding of high tensile fine grain steels in vessel and apparatus construction and high tensile pipe steels.
Search Submerged arc welding wire Products