Stainless welding rod Application
AWS E308L-16 Used for welding ultra-low-carbon Cr19Ni10 stainless steel structures, and also used for 06Cr18Ni11Ti corrosion-resistant stainless steel structures whose working temperature is lower than 300°C. Mainly used in the manufacture of synthetic fiber, chemical fertilizer, oil and other equipments
AWS E316L-16 Used for welding of synthetic fiber and other equipments and the same type of stainless steel structure, In addition, it is applied to weld the steel that cannot be processed with thermal treatment, such as Chromium stainless steel, clad steel, dissimilar steel, etc.
AWS E308-16 Used for welding the corrosion resistant stainless steel structure, such as 06Cr19Ni10 and 06Cr18Ni11Ti and their working temperature should be below 300℃
AWS E347-16 Used for welding important corrosion resistant stainless steel this contains stable Ti such as 06Cr18Ni11Ti.
AWS E316-16 is used in welding the 06Cr17Ni12Mo2 stainless steel that is applied in the media of organic acid and inorganic acid.
AWS E309-16 is used in similar type stainless steel, dissimilar stainless steel and high chromium steel and high manganese steel.
We are manufacture in Tianjin, China, We produce Stainless welding rod, Stainless Steel Electrode, the standards are AWS E308L-16, AWS E316L-16,AWS E308-16,AWS E347-16,AWS E316-16,AWS E309-16.....
Stainless welding rods
Stainless Steel Electrode
AWS E309MOL-16 is used primarily for welding type 316 clad steels, or molybdenum containing austenitic stainless steel to carbon steel.Service temperature must be less than 600ºF.
AWS E310NB-16 electrodes deposit weld metal that is similar in composition to that of type 310, with an addition of columbium and a reduction in carbon content. Electrodes are primarily used for welding steels clad with type 347.
AWS E310H-16 electrodes are used to weld high alloy heat and corrosion resistant castings. This electrode is not recommended for service in high sulfur atmospheres.
AWS E317-16 electrodes are used for welding of dissimilar steels to carbon steel, or stainless steel to carbon steel. Stringer bead technique should be used for flat, horizontal and overhead welding, weaving technique for vertical position.
AWS E320-16 electrodes are used to weld matching composition Niobium (Columbium) and Manganese base material. This alloy is resistant to corrosion, especially of sulfuric acids.