Xiang Welding Industrial Co Ltd
Single and multiple-pass applications welding using recommended submerged arc fluxes, high-strength low-alloy steels, sour gas pipeline, storage tanks, pressure vessels, double jointing, heavy equipment components
• High-strength low-alloy steels
• Heavy equipment fabrication
• Oil & gas
• Offshore fabrication
• Sour gas applications
Main Application
RE-DRYING
Welding Positions:
TYPICAL WELD DEPOSIT CHEMICAL COMPOSITION*
Classification:
AWS A5.23: ECF3
Related Products:SWX 120, SWX 150, SWX 160, HN-590 Sub-Arc Flux
For a complete list of diameters and packaging, please contact Hobart Brothers at (800) 424-1543 or (937) 332-5188 for International Customer Service.
Description
AWS A5.23: ECF3 Submerged Arc Cored Wires Low-Alloy Steel,China, Tianjin
Category
AWS A5.23: ECF3 is a low-alloy composite metal-cored wire electrode for submerged arc welding in high strength applications. And it meets AWS A5.23 chemistry F3, and is designed for tensile strength levels above 100 ksi.
FEATURES&BENEFITS
Not recommended
Industries
Structural fabrication, oil &gas, power generation, heavy equipment
RECOMMENDED FLUXES
• Metal-cored wire can offer improved deposition rates compared to solid wires at comparable amperages
• Metal-cored wires offer broader penetration profiles compared to solid wires at comparable welding parameters
• Weld deposit chemical composition requirements are identical to those of EF3 solid wires
• Weld deposit chemical composition consists of less than 1% nickel
• Very good low-temperature impact toughness in both the as-welded and stress-relieved conditions
• Provides potential to increase travel speed for improved productivity
• Helps to prevent burn-through when welding at high currents on root passes and relatively thin materials.
• Suitable as a higher-productivity alternative in many applications currently using EF3 solid wire
• Suitable for use in sour gas applications where stress corrosion cracking due to hydrogen-sulfide is a concern
• Helps minimize the risk of cracking in critical applications and harsh service environments
WIRE TYPE
 Metal-powder, metal-cored wire
CURRENT
HN-590, SWX 120, SWX 150
STANDARD DIAMETERS
Direct Current Electrode Positive (DCEP), Direct Current Electrode Negative (DCEN), Alternating Current (AC)
3/32” (2.4 mm)
STORAGE
Product should be stored in a dry, enclosed environment, and in its original intact packaging
AWS CLASSIFICATIONS
TYPICAL MECHANICAL PROPERTIES*
TYPICAL CHARPY V-NOTCH IMPACT VALUES*
TYPICAL OPERATING PARAMETERS*
Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical depending
on the type and thickness of steel being welded.
Parameters are provided for informational purposes only. All values are approximate. The optimal voltage may vary (typically ±2 volts) depending on the choice of flux, material thickness, joint design, and other variables specific to the application.
Likewise, actual deposition rate may vary depending on choice of flux and contact tip to work distance.
STANDARD PACKAGING