Xiang Welding Industrial Co Ltd
Single and multiple-pass welding using recommended fluxes, carbon & non-alloyed steels, general fabrication, structural components, heavy equipment components, railcar frames, wheel fabrication, storage tanks, boilers, pressure vessels, ship panels, pipe double jointing, wind towers
• Single and multi-pass welding 
• General fabrication
• Structural and bridge fabrication
• Storage tanks
• Pressure vessels
• Heavy equipment
Main Application
RE-DRYING
CONFORMANCES AND APPROVALS
TYPICAL WELD DEPOSIT CHEMICAL COMPOSITION*
Classification:
AWS A5.17: EC1
Related Products:SWX 120, SWX 150, HA-495 Sub-Arc Flux, HN-590 Sub-Arc Flux, EM13K-S MOD
For a complete list of diameters and packaging, please contact Hobart Brothers at
(800) 424-1543 or (937) 332-5188 for International Customer Service.
Description
AWS A5.17: EC1,Submerged Arc Cored Wires Carbon Steel,China, Tianjin
Category
 is a composite electrode for submerged arc welding of carbon steel plates using the recommended fluxes. The electrode chemistry conforms to the solid wire classification EM13K per AWS A5.17.
FEATURES&BENEFITS
Not recommended
Industries
General fabrication, structural & bridge fabrication, heavy equipment, shipbuilding, transportation
RECOMMENDED FLUXES
• Metal-cored wire can offer improved deposition rates compared to solid wires at comparable amperages
• Metal-cored wires offer broader penetration profiles compared to solid wires at comparable welding parameters
• Weld deposit chemical composition is specially formulated to be similar to EM13K solid wire
• Improved tolerance to rust and mill-scale than EM12K solid wire and SubCOR EM12K-S cored wire
• Provides potential to increase travel speed for improved productivity
• Helps to prevent burn-through when welding at high currents on root passes and relatively thin materials.
• Suitable as a higher-productivity alternative in many applications currently using EM12K and EM13K solid wires
• Helps reduce material preparation requirements and potential for porosity and part rework
WIRE TYPE
Metal-powder, metal-cored wire
CURRENT
 HA-495, HN-590, SWX 120, SWX 150
STANDARD DIAMETERS
Direct Current Electrode Positive (DCEP), Direct Current Electrode Negative (DCEN), Alternating Current (AC)
5/64” (2.0 mm), 3/32” (2.4 mm), 1/8” (3.2 mm), 5/32” (4.0 mm)
STORAGE
Product should be stored in a dry, enclosed environment, and in its original intact packaging
AWS CLASSIFICATIONS
TYPICAL MECHANICAL PROPERTIES*
TYPICAL CHARPY V-NOTCH IMPACT VALUES*
TYPICAL OPERATING PARAMETERS*
Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical depending
on the type and thickness of steel being welded.
Parameters are provided for informational purposes only. All values are approximate. The optimal voltage may vary (typically ±2 volts) depending on the choice of flux, material thickness, joint design, and other variables specific to the application.
Likewise, actual deposition rate may vary depending on choice of flux and contact tip to work distance.
STANDARD PACKAGING
TYPICAL DIFFUSIBLE HYDROGEN* (Gas Chromatography per AWS A4.3)
Welding Positions: