Standard: AWS A5.18 ER70S-6, GB ER50-6, DIN SG2, BS A18, JIS YGM12
Sizes: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm
Packaging Details: OEM acceptable
Black and white plastic spools D100, D200, D270, D300
D100, 1KG/spool, 1000spools/pallet
D200, 5KG/spool, 200spools/pallet
D270, 15KG/spool, 72spools/pallet
D300, 15KG/spool, 72spools/pallet
Metal spools K300
K300, 15KG/spool, 72spools/pallet
Drum packing, 250KG/drum
Payment terms: 100% LC at sight or 30% TT in advance balance against copy of BL.

Trade terms: FOB, CFR, CIF,

Loading Port: xingang, tianjin, China

Delivery Detail: Within 15 days after confirmation

ER70S-6 welding wire is a kind of low carbon steel wire which is welded by the method of MAG, its compressive strength and tensile strength can reach 420 MPa, this kind of wire is usually treated by drawing process, therefore, the surface is glossy and the weld porosity is small, in order to get high quality product, we must require the manufacturer to control the content of martensite and austenite strictly.

The diameter is often in the range of 0.1-10mm. the tolerance is often limited in the range of ± 0.01mm.

ER70S-6 welding wire also has extensive application in the shipbuilding industry, vehicle industry, petroleum industry.

For the ER70S-6 welding wire is welded by the method of MAG, the cost of working process is lower, the weld mechanical properties are qualified, which may cover more market.

An introduction about ER70S-6 welding wire

Chemical Composition (%)

Welding Positions:

Notes:

1.The welding electrodes should be preheated 2 hour at 300~350℃ before welding.
2.The impurities such as rust, oil stains and moisture must be cleared off of the work piece.

 Deposited metal