Flux Cored Welding Wire Application
Flux Cored Wire
Flux Cored Arc Welding Wire
FCAW welding wire production video
AWS A5.22 E410NiMoT1-1 Flux Cored Arc Welding Wire is a gas-shielded flux-cored wire with better control of hydrogen levels and excellent impact toughness at 0℃.
AWS A5.22 E2209T1-1 is a flux cored arc welding wire that is suitable for the welding of duplex stainless steel such as UNS S31803 (Alloy 2205).
AWS A5.22 E2209T1-4 Flux Cored Arc Welding Wire is suitable to duplex stainless steel such as UNS S31803 (Alloy 2205).
AWS A5.34 ENiCrMo3T1-4 Flux Cored Arc Welding Wire is the rutile high nickel alloy flux cored wire.
AWS A5.20 E71T-1C Flux Cored Arc Welding Wire is a flux-cored wire designed to be used with C02 gas and it's all-position welding with both single and multiple pass welds on mild
Highly efficient E70T-1 wire that can increase productivity when welding in deep grooves compared to conventional wires with the same classification
RXR is an E70T-1 wire that has a higher level of de-oxidizing elements to handle mill scale, rust and other contaminants.
This wire has a basic slag system and is designed for use where deposit quality and properties are of a first concern. Weld metal hydrogens are very low making this wire more crack resistant than the acid slag types of wires.
This tubular wire combines excellent operator appeal with mechanical properties superior to most conventional E71T-1 wires. A soft quiet arc with virtually no spatter produces a weld deposit with diffusible hydrogen levels typically less than 5ml/100 g required by MIL-E-24403/1.
This wire has low smoke, spatter and excellent operator appeal For mild and some low alloy steels.
EN ISO 18276-A T 55 Z Z M M 1 H5 is used for welding in structural and mechanical fabrication automated or robotic welding
JIS Z3313 T57 2 T1-1 C A-N1 H10
EN ISO 17632-A-T50 2 1Ni P C 1
JIS Z3313 T62 2 T 15-0 C A H10
EN ISO 17632-A T50 2 R C 3 H10
EN ISO 17632-A-T50 4 1Ni P M 1 H5 Typical industrial applications include shipbuilding, machinery, piping, bridge, structural fabrication
JIS Z3313 T57 4 T1-1 C A-N3 H10
EN ISO 17632-A-T50 4 1.5Ni P C 1
is suitable for single or multipass welding for high strength low alloy steel.
EN ISO 18276-A-T 69 4 Mn2NiMo M M 3 Single and multipass welding of high strength low alloy steels.