Xiang Welding Industrial Co Ltd
EN 760: SA FB 1 55 AC is a fluoride-basic flux with high basicity and low impurity levels such as P and S . As a result of low oxygen levels in the weld deposits uniform mechanical properties with high toughness values at low temperature are achieved. Designed for multi wire application where high deposition rate as well as good slag removal is required this flux shows excellent weldability and weld bead appearance.EN 760: SA FB 1 55 AC is suitable for welding on D .C . and A .C . using single, tandem and Multi-Wire processes.

ISO 14174: S A FB 1 55 AC
(EN 760: SA FB 1 55 AC)
Characteristic chemical constituents
Welding Positions:
Flux density: 0.95 kg / dm3 (l)
Grain size acc. to ISO 14174: 2 – 20 (Tyler 8 x 65)

Metallurgical behaviour acc. to ISO 14174 type of current DC
Welding Flux
Low hydrogen levels after redrying according to the recommendation on the flux labels and optimum mechanical properties, whilst observing recommended heat control, enable the welding of:

     ●thick-walled constructional steels with yield strengths of up to 420 MPa
       OFF-SHORE applications up to 550 MPa yield strength on steels such as BS 4360-Grade 50 D and S355 2G3 acc. to DIN         ●EN 10025 (previous designation St 52-3N)
     ●fine grain structural steels for low temperature requirements with impact toughness at –60 °C or below
     ●high tensile fine grain steels such as S690QL1 and N-A-XTRA 70
     ●boiler and vessel steels such as 16Mo3/A204 grade A, 13CrMo4-5/A387 grade 12 or 10CrMo9-10/A387 grade 22