Xiang Welding Industrial Co Ltd
Formulated to allow excellent impact values at lower temperatures. All position wire with low hydrogen levels.
Description
Welding Positions
Flux Cored Welding Wire
Classification:
AWS A5.20: E71T-1MJ H8, E71T-9MJ H8, E71T-12MJ H8
EN ISO 17632-A T42 4 P M21 2 H10
TYPICAL DIFFUSIBLE HYDROGEN*
Fast-freezing, rutile-type, flux-cored wire



75-85% Argon (Ar)/ Balance Carbon Dioxide (CO2), 35-50 cfh (17-24 l/min)


Direct Current Electrode Positive (DCEP)


0.045” (1.2 mm), 0.052” (1.4 mm), 1/16” (1.6 mm)



Not recommended



Product should be stored in a dry, enclosed environment, and in its original intact packaging.
• Single or multi-pass welding
• Non-alloyed and fine grain steel
• General fabrication
• Structural and bridge fabrication
• Ship and barge construction
• Pressure vessels
• Heavy equipment
APPLICATIONS
SLAG SYSTEM OR WIRE TYPE
SHIELDING GAS
TYPE OF CURRENT
STANDARD DIAMETERS
RE-DRYING
TYPICAL WELD METAL CHEMISTRY* (Chem Pad)
TYPICAL MECHANICAL PROPERTIES*
CONFORMANCES AND APPROVALS
• AWS A5.20, E71T-1MJ H8, E71T-9MJ H8, E71T-12MJ H8
• AWS A5.20M, E491T-1MJ H8, E491T-9MJ H8, E491T-12MJ H8
• ASME SFA 5.20, E71T-1MJ H8, E71T-9MJ H8, E71T-12MJ H8
• ABS, 75% Ar/25% CO2, 3YSA
• ABS, 80% Ar/20% CO2, 3YSA (Guaranteed 34J CVN toughness @ -40°C)
• Bureau Veritas, 80% Ar/20% CO2, S3YM
• CWB, 85% Ar/15% CO2, E491T1-M20A4-CS2-H4 (E491T-12MJ-H4)
• CWB, 75-80% Ar/CO2 Balance, E491T1-M21A4-CS2-H4 (E491T-12MJ-H4)
• CWB, 92% Ar/8% CO2, E491T1-M20A4-CS2-H4 (E491T-12MJ-H4)
• DNV-GL, 75-80% Ar/Balance CO2, III Y40MS
• EN ISO 17632-A: T42 4 P M21 2 H10
• Lloyd’s Register, 80% Ar/20% CO2, 3YS H5
• AWS D1.8 Conformance, 75% Ar/25% CO2, (0.052” diameter)
STANDARD DIAMETERS AND PACKAGES: 
For a complete list of diameters and packaging, please contact
• Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical
depending on the type and thickness of steel being welded.
• See Above: This information was determined by welding using 75% Argon (Ar)/25% Carbon Dioxide (CO2) shielding
gas with a flow rate between 35-50 cfh (17-24 l/min).
• All positions include: Flat, Horizontal, Vertical Up, and Overhead.
STORAGE
FEATURES AND BENEFITS
· Excellent weld metal toughness, even at lowtemperatures
· Low fume generation rates
· Excellent arc characteristics and fast-freezing slag
· Very low spatter
· H8" low-hydrogen weld deposit
· Helps minimize the risk of cracking in demanding and critical applications
· Increases puddle visibility and operator appeal, helps improve the working environment
. Provides excellent operator appeal, puddle control, and weld contour when welding in all positions
· Reduces clean-up time, helps improve productivity Helps minimize risk of hydrogen-induced cracking
TYPICAL CHARPY V-NOTCH IMPACT VALUES*