Xiang Welding Industrial Co Ltd
AWS A5.23 F8A4-EA2-G welding fulx xiang welding  is an agglomerated aluminates basic flux, with little weld metal alloy pick-up of Mn and Sis Suitable for welding non-and low alloy steels with single and multiple wires application. Designed for two-run or multiple layers with both AC and DC technique. Has excellent slag detachability and good operation performance. Good mechanical properties at low temperatures can be achieved if it is combined with appropriate wire. It is suitable to be applied in following industries.
Shipbuilding
Boiler and Pressure Vessel
Pipemill up to API-5L-X70 Low alloy and High Tensile/Strength Steel Structural Fabrication Bridge Fabrication
AWS A5.23 F8A4-EA2-G
EN ISO 1417-A S 46 3 AB S2Mo
Characteristics and Application
Typical chemical Composition of Weld Metal (%)
Welding Positions:
Notes on usage:
1. The flux must be re-dried at a temperature of 300-350℃ for 1—2hr holding time when it is affected by moisture pick-up.
2. Adding a certain amount of new flux with used one to maintain good quality of weld metal.
Mechanical Properties 
Welding Flux
Yield strength 549Mpa Tensile Strenght 614MPa Elongation 26% Charpy V-Notch -40℃ 50J
C 0.06 Mn 1.6 Si 0.029 P 0.03 S 0.010  Mo 0.45