AWS A5.22 E308HT1-1

JIS Z 3323 TS 308H-F C 1 1 

Characteristics and Application

AWS A5.22 E308HT1-1 Flux Cored Arc Welding Wire is special for 100% C02 gas and all-position welding. It owns excellent slag release. An 19Cr-9Ni austenitic stainless steel deposited can be used for joining 18Cr-8Ni austenitic steels such as AIS1304. AIS1301. 302. SUS304H. It provides good resistance to inter-granuIar corrosion and has higher tensile strength than 308L. It also can be used as an intermediate layer for hardfacing.

Typical chemical Composition of Weld Metal (%)

Typical Mechanical Properties of Weld Metal

Welding Positions:

Notes on usage:

1. Before welding, oil, rusty, and moisture should be cleaned off the base material that should have the proper protection from the wind in welding site.  
2. Use 100% purity or higher C02 shielding gas.

3. Keep the product dry, while it is stored or delivered.

C 0.05  Mn 1.5  Si 0.50  P 0.023  S 0.008 Cr 19.90 Ni 9.8

Yield strength   Tensile Strenght 586MPa  Elongation 40%    

Flux Cored Arc Welding Wire