Xiang Welding Industrial Co Ltd
AWS A5.17 F7A6 EH12K welding fulx xiang welding is an agglomerated aluminates basic flux, with little weld metal alloy pick-up of Mn and Si. Suitabie for welding non-and low alloy steels with single and multiple wires application. Designed for two-run or multiple layers with both AC and DC technique. Has excellent slag detachability and good operation performance. Good mechanical properties at low temperatUreS can be achieved if it is combined with appropriate wire. It is suitable to be applied in fotlowing industries.
Boiler and Pressure Vessel
Pipemiil up to API-5L-X70 Low a!loy and High Tensile/Strength Steel Structural Fabrication Bridge Fabrication
AWS A5.17 F7A6 EH12K
EN ISO14171-A S46 4 AB S3Si
Characteristics and Application
Typical chemical Composition of Weld Metal (%)
Welding Positions:
Notes on usage:
1. The flux must be re-dried at a temperature of 300—350℃ for 1—2hr holding time when it is affected by moisture pick-up.
2. Adding proper quantity of new flux with the used one to maintain good quality of weld metal.
Mechanical Properties 
Welding Flux
Yield strength 508Mpa Tensile Strenght 530MPa Elongation 31% Charpy V-Notch -51℃ 32J
C 0.06 Mn 2.0 Si 0.5 P 0.03 S 0.01