Xiang Welding Industrial Co Ltd
NiMo-alloyed wire electrode with higher Mn-content for submerged arc welding of high tensile fine grain steels in vessel and apparatus construction, high tensile pipe steels and high strength shipbuilding steels.
AWS A5.17: EH12K Submerged arc welding wire 
Chemical Composition (%)
Welding Positions:
Diameter
Copper-coated, smooth finish free from surface defects and foreign matter.
Base Materials
2.0 – 5.0 mm; Sizes and tolerances acc. to ISO 544 and AWS A5.17.
Classification:
EN ISO 14171-A (EN 756): S3Si
SFA 5.17 / AWS A5.17: EH12K
Wire Electrode Surface
Package Forms
Non-alloy structural steels acc. to EN 10025 and ASTM: S235JRG2 / A570 Gr. 36 to S355J2G3R / A572 Gr. 50
suitable fluxes EN 760: SA AB 1 67 AC H5 and EN 760: SA AB 1 67 AC H5


Fine grain steels acc. to EN 10025, EN 10028 and ASTM: P355N / S355NL / A516 Gr. 70 / 633 Gr. E and P460N / S460NL
suitable fluxes EN 760: SA AB 1 67 AC H5, EN 760: SA AB 1 67 AC H5, EN 760: SA FB 1 67 AC H5 and EN 760: SA FB 1 55 AC


Off-Shore structural steels up to 460 MPa yield strength and BS 4360-Grade 50 D
suitable fluxes EN 760: SA AB 1 67 AC H5 and EN 760: SA FB 1 55 AC


Shipbuilding steels: higher strength, suitable fluxes BF 5.1 and EN 760: SA FB 1 55 AC


Pipe steels acc. to ISO 3183, EN 10208 and API-5: L360N / X52 to L485Q / X70
suitable fluxes EN 760: SA AB 1 67 AC H5, EN 760: SA AB 1 66 AC H5 and EN 760: SA FB 1 67 AC H5


Boiler and vessel steels acc. to EN 10028 and ASTM: P235GH / A516 Gr.55, P355GH / A516 Gr. 70 and S275J2G3 / A572 Gr. 42, S355J2G3 / A572 Gr. 50
suitable fluxes EN 760: EN 760: SA AB 1 67 AC H5, EN 760: SA FB 1 67 AC H5 and EN 760: SA FB 1 55 AC


Flux type suitability is strongly dependent on its application. In combination with the wire electrode the most suitable flux should match the requirements of the plate material as closely as possible under the existing welding conditions. Further information can be obtained from the technical flux data sheets.
Coils, spools, drums and spiders as standard package forms for SAW-wire electrodes, different package forms on request.