Designed as a low Manganese (Mn) E71T-1C product to assist with conformance to OSHA requirements and NIOSH and ACGIH recommendations for Manganese. This product offers reductions of Mn in the weld fume of 60-80% over a standard E71T-1C product with low diffusible hydrogen as well as enhanced operator appeal and excellent out of positional capability.

Description

Welding Positions

Flux Cored Welding Wire

Classification:

A5.29: E71T1-GC H8; A5.36: E71T1-C1A4-K13 H8

TYPICAL DIFFUSIBLE HYDROGEN*

Fast freezing, rutile type, flux-cored wire

100% Carbon Dioxide (CO2) 35-50 cfh (14-24 l/min)

Direct Current Electrode Positive (DCEP)

0.045” (1.2 mm), 1/16” (1.6 mm)

Not recommended

Product should be stored in a dry, enclosed environment, and in its original intact packaging

Excellent for applications where compliance with OSHA regulations, or NISOH and ACGIH recommendations for Manganese could be a concern, such as confined spaces or high volume manufacturing

• Shipbuilding

• Structural steel
• Heavy equipment

• General fabrication

APPLICATIONS

SLAG SYSTEM OR WIRE TYPE

SHIELDING GAS

TYPE OF CURRENT

STANDARD DIAMETERS

RE-DRYING

TYPICAL WELD METAL PROPERTIES* (Chem Pad)

TYPICAL MECHANICAL PROPERTIES* (As Welded)

CONFORMANCES AND APPROVALS:

• AWS A5.29, E71T1-GC H8
• AWS A5.29M, E491T1-GC H8
• AWS A5.36, E71T1-C1A4-K13 H8
• AWS A5.36M, E491T1-C1A4-K13 H8
• ASME SFA 5.29, E71T1-GC H8
• ABS, 100% CO2, 3YSA H10

• CWB, 100% CO2, E491TG-C1Z-G-H8 (E491T-G-H8)

• Maintaining a proper welding procedure - including pre-heat and interpass temperatures - may be critical
depending on the type and thickness of steel being welded.
• See Above: The information above was determined by welding using 100% CO2 shielding gas with a flow rate between 35-50 cfh (14-24 l/min).

• All positions include: Flat, Horizontal, Vertical Up, and Overhead.

STORAGE

FEATURES AND BENEFITS

• Enhanced out of positional capability
• Low spatter and fume
• Extremely low manganese emissions
• Enhanced slag release

• Increased operator appeal

• Improved operator comfort and productivity

• Economical replacement for E71T-1/-9 that will assist with conformance to environmental regulations

• Reduced clean-up time and risk of inclusions

Keywords

AWS A5.29: E71T1-GC H8; A5.36: E71T1-C1A4-K13 H8,Flux Cored Welding Wire ,China, Tianjin.

STANDARD DIAMETERS AND PACKAGES: 

 For a complete list of diameters and packaging, please contact Hobart Brothers at (800) 424-1543 or (937) 332-5188 for International Customer Service.

TYPICAL CHARPY V-NOTCH IMPACT VALUES* (As Welded)